Single layer of meltblown fibres
This construction is offered in meltblown only. Made by simply blowing the desired weight in one go, and then putting it into either pad or roll format. Single layer offers fast absorption but limited durability. The marine and spill industries really appreciate this construction type.
Sonic bonding lowers lint and increases the strength slightly
The meltblown fibres are passed through sonic heads which bond the fibres together at small points (the area covered by these bond points is approximately 5% of the pad so it offers limited effectiveness at lint control). This construction makes the product a little stronger, but from an economic viewpoint it may be better to choose a laminated version instead.
Tough no-lint top sheet | Highly absorbent core
This product involves sonically attaching a thin layer of "no-lint" spun-bond material onto the top surface of the sorbent. This greatly reduces the linting (fibres detaching easily) and improves the strength considerably. When used in roll form, the product has the large advantage of not being as slippery as double-sided lamination sorbents.
Fine fibre top sheet | Sonically bonded absorbent core | Fine fibre bottom sheet
This construction type represents our highest quality and most absorbent pads. It also possesses excellent wicking properties. Fine fibre features less linting when compared to the sonic bonded choice, but more durability than when compared to double sided lamination. Another useful attribute is that it isn't slippery when wet.
Tough no-lint top sheet | Highly absorbent core | Medical grade low-slip poly backing
This construction is a clever and simply smarter solution for most maintenance situations where the sorbent can be placed under the leak. The sorbent will hold the spill but does have a tendency to permeate through to the ground below. This is prevented with the poly-backing layer.
Tough no-lint top sheet | Sonically bonded absorbent core | Tough no-lint bottom sheet
This construction offers a sorbent that has both surfaces covered with a non-linting strong spun-bond cover. This configuration is the best for durability and results in a sorbent which gives virtually no linting at all. Caution is recommended, however, as any foot traffic should be avoided on this product, as it has the potential to be slippery when wet.
